PDU-R UART/RS232 Protocol decode software with Tektronix make DPO7000 and DPO/DSA7000 Series oscilloscope captures and decode the UART/RS232 signals. PDU-R software allowing the decoded data to be displayed in hexadecimal, binary, ACII or decimal formats. The PDU-R software would automatically recognize the data rate and decode the serial signals.
Advanced Debug Capabilities The feature rich PDU-R UART/RS232 protocol decodes software automatically recognizes the Tx and RX data speed and displays the decoded data in different data formats. Engineers can configure the PDU-R for odd, even, , or no parity.
For easy and rapid analysis, PDU-R offers the flexibility to display the order of MSB and LSB in decoded byte. Engineers can define the number of bits per data to create a customized view of the decoded data.
In the USRT/RS232 Protocol Analysis Software, an engineer can quickly link the decoded data to waveform by selecting data in the result table. In the detailed view, the ‘1’ and ‘0’ are overlaid on the waveform to quickly analyze data transition. When signals are decoded from a wfm or CSV file, the PDU waveform display plots the waveform enabling a simultaneous view of time and data domains.
Features • Converts time domain waveform information into data domain, and displays the contents in UART/RS232C message format.
• Displays waveform and decoded data simultaneously in a single window allowing efficient debugging.
• Links any UART/RS232C frame to the waveform, allowing efficient analysis of UART/RS232 communication.
• Zooms the waveform for any of the decoded data allowing engineers to note analog characteristics of the waveform.
• Displays ‘1’ and ‘0’ annotation for the zoomed waveform in the detailed view
• Displays the decoded data in hexadecimal, binary, decimal and ASCII formats based on the selected format.
• Uses the Search function to quickly locate the specific data in thousands of decoded UART/RS232 messages.
• Timestamps with reference to trigger position allowing engineers to determine the timing from the trigger position.
• Analyze offline using the Ref waveforms, .wfm (Tektronix oscilloscope’s internal waveform file format) and .csv files.
• Saves the decoded messages in CSV format.
• The detailed view displays ‘1’ and ‘0’ annotation for the zoomed waveform
Ordering Information
PDU-R UART/RS232 Protocol Decode Software (includes a CD with software)
Supported Oscilloscopes Tektronix DPO7000 Series oscilloscopes
DPO/DSA70000 Series oscilloscopes
