MDIO (Management Data Input/Output) Introduction to MDIO: Management Data Input/Output (MDIO), or Media Independent Interface Management (MIIM) is a serial bus protocol defined for the IEEE 802.3 standard Ethernet...
DDR5 I3C What is the role of the I3C Protocol in DDR5? DDR5 has significant improvement over DDR4. DDR5 offers higher bandwidth with a data rate of up to...
I3C Protocol: Test Setup for Electrical Validation I3C devices are going through mass adoption at the moment. One challenge however remains for I3C devices is interoperability. The I3C devices...
The CHIPS Act of 2022 – Shaping the New Semiconductor Market. On July 28, 2022, congress passed the CHIPS and Science Act of 2022 to strengthen the domestic manufacturing...
I2C Clock Stretching Introduction: I2C Protocol I2C Protocol stands for Inter Integrated-Circuit. I2C is a simple two-wire design, half-duplex serial communication protocol, and the data is transmitted bit by...
SMBus Protocol SMBus Protocol Introduction: The System Management Bus (SMBus) is a two-wire interface through which various system component chips and devices can communicate with each other and with...
Differences between LIN, CAN, and FlexRay Protocols Today’s automobiles are not just about engines and wheels, it is much more. The factor that defines these automobiles is the electronic...
Controller Area Network (CAN) Protocol Debugging What is CAN protocol? The Controller Area Network (CAN) is a serial communications protocol that supports distributed real-time control with a very high...
Memory Interface for Automotive Infotainment System. The automotive industry is going through a massive transformation. The consumer-based digital technologies and experiences are pushing the car in vehicle Information system...
How to select memory for automotive? Current Challenges in Automotive flash storage Technologies The automotive industry is going through a mega transformation. The consumer-based digital technologies and experiences are...
