Understanding xSPI: The Future of High-Speed Flash Memory Interfaces Introduction to XSPI (What is XSPI?) XSPI stands for “eXpanded Serial Peripheral Interface”. It’s a high-speed communication protocol designed to...
Sideband Signal Analysis for PCIe Interfaces Using PGY-PCIeLP-SBA Silicon vendors need to validate the electrical timing measurements of side band signals at different state of the DUT and see...
PCIe Sideband signal operation during lower Power entry and exit In modern applications such as mobile devices, servers, gaming systems, and network storage, there is a growing demand for...
During the power-on sequence of a PCI Express (PCIe) system, the reference clock (REFCLK) and sideband signals may not have reached their required stability or operating tolerance. The PERST#...
UFS 4.0 in Automotive: Powering Next-Generation Vehicles In today’s rapidly evolving automotive landscape, vehicles are transforming into sophisticated, connected computing platforms. As manufacturers push the boundaries of safety, connectivity,...
Understanding Clock Stretching in I²C Communication and How PGY-I2C-EX-PD Simplifies Debugging Efficient communication between devices is crucial in modern embedded systems, especially when using protocols like I²C (Inter-Integrated Circuit)....
Universal Flash Storage (UFS) uses the MIPI Alliance’s MPHY physical layer specification to interconnect the UFS device with the host (SoC) or application processor. This is an embedded interface...
DDR5 is fifth generation dynamic random-access memory provides superior performance over DDR4. It is designed for next generation CPUs and GPU to address artificial intelligence applications and large data...
Introduction The MIPI I3C Bus interface enhances the legacy I2C standard by reducing the number of physical pins required in sensor systems while supporting low-power, high-speed digital communication, similar...
Overview In the realm of embedded systems, I2C (Inter-Integrated Circuit) is a widely used communication protocol that enables devices to communicate with each other over a short distance. One...
