Protocol Exercisers & Analyzers

PCIe 协议分析仪

Model No: PGY-PCIeGen3/4/5

PGY-PCIeGen3/4/5-PA 是一款支持高达 PCIe Gen5 速率协议分析的 PCIe 协议分析仪。PCIe 设计和测试工程师可以以实惠的价格,轻松捕获并记录特定事件下 2.5、5.0、8、16 和 32GT/s 的追踪数据,并即时获取错误报告。这使设计和测试工程师能够缩短开发时间并满足上市时间需求。PCIe 数据通过根复合物与端点(受测设备)之间的中介层进行捕获。PCIe Gen3/4/5 协议分析仪软件提供事务层数据包 (TLP)、数据链路层数据包 (DLLP) 的完整解码和错误分析,并包含 LTSSM 信息。

Key Protocols
  • PCIe
  • Free Online Technical SupportFree Online Technical Support
  • Free Software UpdatesFree Software Updates
  • Global Sales SupportGlobal Sales Support
  • Evaluation Units AvailableEvaluation Units Available
  • 主要特性
  • 规格参数
  • 技术库
  • PCIe Gen1/2/3/4/5-X4/8 协议解码与分析。
  • 目前支持四/八通道 PCIeGen1/2/3/4/5 总线。
  • 协议分析仪标准配置提供支持高达 PCIe Gen5 速率的 M2/U.2/CEM/E1.S/SD Express 中介层。
  • NVME 协议解码功能
  • 用于四通道的可选向下焊接探针端头,速度可达 PCIe Gen3 (8Gbps)
  • TS1, TS2, TLP, DLLP 数据包的协议解码。
  • 基于硬件的协议数据包(TS1、TS2 和 IDLE)过滤功能。
  • 基于软件的搜索、滤入和滤出功能。
  • 基于 TS1、TS2、TLP 和 DLLP 数据包内容的硬件级协议感知触发功能。
  • 先进的多级 if-then-else if 触发功能。
  • 标准缓冲区大小为 16GB,TX 和 RX 的总和可扩展至 64GB。
  • 详细查看每个 TLP/DLLP 的所有字段值。
  • 针对 PCIe 协议流量的 LTSSM 分析。
  • 内存分段,每个分段具有不同的触发条件
  • 触发事件时的触发输出信号可触发示波器等其他仪器。
  • 使用 USB 3.0 连接主机系统。
  • 解码后的数据包可导出为 .txt 文件,以便进一步分析。
  • PGY 协议分析仪重量轻,可用于现场/实地测试。
  • 可现场升级,实现便捷维护,并可远程将固件升级至最新功能集。
  1. 未来版本将支持该功能
Read More...

M.2 联接器

SD Express 中间件

CEM 中介层

软件界面与分析视图

Data Rates SupportedPCIe Gen1, Gen2, Gen 3, Gen 4, Gen5
Link WidthFour/Eight lanes
(Four/Eight TX and Four/Eight RX).
ProbesM.2 Interposer (Standard), Optional orderable CEM, U.2, E1.S, SD Express Interposers
Solder Down Active Probes for speeds up to PCIe Gen3. (Optional)
Protocol DecodeTS1, TS2, TLP, DLLP, SDS, IDLE, EIOS, EIEOS, FTS, SKP, NVME, Decoding of Configuration register
Trace Capture SizeSupports Continuous streaming of Protocol data to Host computer SSD/HDD and Post Capture up to buffer size.
TriggerBased on TS1, TS2, TLP, DLLP.
ConnectorsInterposer Interface and Trigger in/out signal
Interface for Host ComputerUSB 3.0
Host Computer RequirementsProcessor: Intel i7 10th Generation or better (Equivalent)
Operating System: Windows 8.0/8.1/10/11 64bit OS.
RAM: minimum 16GB but the product would give a faster response for 32GB/64GB/more.
Storage: 256GB SSD or more (minimum storage capacity of 1GB should be available in the hard disk drive. User can use more storage based on trace storage requirement.)
Display resolution: 1024X768.
Interface: Host computer should support USB 3.0 interface.
Dimension (WxHxD)(W x H x D) (20.5X5X25) cms. (Tentative)
WeightApprox. 6 kg
Power Requirement12V, 6A DC Power Supply (AC/DC Supplied along with Analyzer).

Similar Products