100Base-T1 车用以太网协议分析仪

强大的触发功能

Powerful Trigger capabilities

PGY-100BASE-T1-PA 支持业界领先的协议层触发功能。用户可以定义从第 2 层到第 7 层的触发条件。先进的带有 If-then-else if 的多层触发功能允许设计工程师同时监控多个触发条件。

触发条件

Stack	Protocol Analyzer	Packet Type
Layer 2	Ethernet type	Mac Destination Address
		Mac Source Address
Layer 3	IPv4	Source IP Address
		Destination IP Address
		TTL
		Checksum
		Fragment Offset
		DF
		MF
		Total Length
		Identification
		TOS
Layer 3	IPv6	Destination IP Address
		Source IP Address
		Payload length
		HOP Limit
		Traffic Class
		Flow Label
Layer 3	ARP	Target Protocol Address
		Source Protocol Address
		Target Hardware Address
		Source Hardware Address
		Operation
		Ready to Transfer
Layer 4	TCP	Source Port
		Destination Port
		Sequence number
		ACK
		Data off
		Window size
		Check sum
		URG
Layer 4	UDP	Source Port
		Length
		Checksum
Layer 4	ICMP	Rest of Header
		Type
		Code
		Checksum
Layer 5-7	Some IP	Service ID
		Length
		Client ID
		Session ID
		Message ID
		Protocol Version
		Interface Version
		Message Type
		Return Code
		Payload

协议分析

Protocol Analysis

以太网是应用最广泛的古老协议之一。设计工程师习惯于以特定格式查看和分析协议数据。PGY-100BASE-T1-PA 协议分析仪软件保持了传统视图并提供先进的分析功能。实时解码功能可对任何 FCS 错误数据包进行解码。

协议数据分析

Analytics of Protocol Data

在数百万个协议数据包中分析协议数据以识别设计问题是一项极具挑战性的任务。

PGY-100BASE-T1-PA 提供有关每一层数据包计数和错误数据包的统计信息。这简化了将错误隔离到特定协议数据包或协议层的过程。强大的基于表达式的搜索功能有助于在获取的整个协议数据中快速定位感兴趣的数据包，以便进一步分析。

产品规格

Ports input	Four 100Base-T1 Ports Upgrade Two additional 100Base-T1 Port MDIO/MDC Port Two CAN Ports
Protocol Analysis	Layer 2 to Layer 7 Automotive Ethernet protocol Analysis MDIO/MDC Protocol Decode Upgradable to CAN Protocol Analysis
Protocol Views	Protocol Listing of Layer 2 Decoding of Protocol layer Packet view Tree view Line training view Analytics
Event Monitoring	FCS errors
Search and Filter	Boolean expression based search and filter capabilities
Capabilities Export of Results	CSV or TXT report generation
Host Computer System requirements	Windows 7/8.0/8.1/10 64bit operating system. It requires RAM of 16GB but the product would give a faster response for a 32GB. The maximum storage capacity of 1GB should be available in the hard disk drive. Users can use more storage based on trace storage requirements. The Display resolution of the monitor is 1024x768 host Computer should support a USB 3.0 Interface

Ports input	Four 100Base-T1 Ports Upgrade Two additional 100Base-T1 Port MDIO/MDC Port Two CAN Ports
Protocol Analysis	Layer 2 to Layer 7 Automotive Ethernet protocol Analysis MDIO/MDC Protocol Decode Upgradable to CAN Protocol Analysis
Protocol Views	Protocol Listing of Layer 2 Decoding of Protocol layer Packet view Tree view Line training view Analytics
Event Monitoring	FCS errors
Search and Filter	Boolean expression based search and filter capabilities
Capabilities Export of Results	CSV or TXT report generation
Host Computer System requirements	Windows 7/8.0/8.1/10 64bit operating system. It requires RAM of 16GB but the product would give a faster response for a 32GB. The maximum storage capacity of 1GB should be available in the hard disk drive. Users can use more storage based on trace storage requirements. The Display resolution of the monitor is 1024x768 host Computer should support a USB 3.0 Interface

车用以太网分析仪测试设置

Automotive Ethernet Analyzer Test Setup

PGY-100BASE-T1-PA 嗅探车用以太网总线并监控主从 ECU 之间的协议活动。同时监控 MDIO 和 MDC 线路并与 100BASE-T1 协议活动相关联，有助于轻松调试设计问题。车用以太网分析仪单元将使用 Prodigy 正在申请专利的解决方案从全双工 PAM3 信号中提取位值。主机管理分析仪单元的操作，并存储和分析获取的数据。100BASE-T1 总线的无源分路确保了获取数据时的极低延迟，使该解决方案成为业界首个正在申请专利的无源分路（Passive TAP）解决方案。

软件界面与分析视图

软件界面与分析视图