It’s 11 PM and the board on your bench still won’t boot. The MCU has power and the clock is running, but somewhere on the I2C bus, a byte is...
Picture this like Eighteen months after your team buys a UFS protocol analyzer, a new SoC project kicks off. Different device vendors this time, different firmware team, and the DUT...
There’s a particular kind of engineering post-mortem that nobody wants to sit through. The one where a device passed every single lab test, shipped to a customer, and then failed...
There’s a particular kind of engineering post-mortem that nobody wants to sit through. The one where a device passed every single lab test, shipped to a customer, and then failed...
In the short decade that I3C has existed, it has overhauled microchip communications. And with increased adoption of I3C around the world, debugging and validation have become more and more...
Dynamic Address Assignment, or DAA, the process by which an I3C controller assigns unique addresses to every device on the bus, is one of I3C’s most powerful features. It’s also...
The change to the more modern Universal Flash Storage (UFS) 4.1 marks a turning point in the data architecture of mobile and automotive systems. The protocol can deliver on-device generative...
The amount of pressure to reduce the weight of wiring is extreme in the migration to Zonal Architectures and Software-Defined Vehicles (SDV). It has caused a significant architectural change that...
Debugging eMMC Boot Failures: Capturing & Analyzing Boot Data with PGY-SSM Embedded systems rely on a flawless boot sequence from their eMMC storage to load firmware and hand off control...
Sideband Signal Analysis for PCIe Interfaces Using PGY-PCIeLP-SBA Silicon vendors need to validate the electrical timing measurements of side band signals at different state of the DUT and see the...
