When running the ENDTAA to the slave device, the assigned address is 0x09, using the
“GETSTATUS CCC” which shows the Address is 0x00. Why does the address appear as
0x00 even though the ENTDAA process has happened successfully?
sudeshna roul Changed status to publish
The user must confirm if they are configuring the View Register settings in the software when
adding the slave device properly.
If the user enters incorrect values of PID, BCR and DCR in the view register options when adding a slave device in
CTS, the dynamic address will not be assigned properly and hence, the GETSTATUS CCC may display an incorrect
address =0x00 in the plot view.
Prodigy Development Changed status to publish
Write your answer.